Skip to content

Roof Pressure Washing in Hollywood, FL

Roof pressure washing here means a low-pressure soft wash with a roof-safe cleaner. Fast Pro removes dark algae streaks, mildew, and moss from shingle, tile, flat, and metal roofs without stripping the surface, and clears and flushes your gutters in the same visit.

Serving Hollywood, FL homeowners. 6+ years of experience. 550+ jobs completed. Last updated .

A roof mid-wash with a clean line against dark streaks at a Hollywood home

Every roof wash includes

Soft wash only
  • Soft wash, never a pressure blaster
  • Roof-safe cleaner matched to the material
  • Gutters cleared first and flushed after
  • Plants covered and rinsed
  • Damage flagged, not hidden
  • Before and after photos

Roof pressure washing in Hollywood, FL

Hollywood roofs mix Mediterranean Revival barrel tile, concrete tile, shingle, and flat roofing across a century of construction. We soft wash all of them, with extra attention to salt exposure near the Broadwalk and coast.

A Hollywood roof could be barrel tile on a Mediterranean Revival home from the city's original 1920s development, concrete tile or shingle on later inland construction, or flat and metal roofing on a Broadwalk condo or newer building. Each needs its own approach, and none should see a pressure washer, especially the city's oldest barrel tile, which can be more brittle than newer concrete product.

Heat, humidity, and salt air off the beach grow algae and mildew faster in Hollywood than in a drier inland city, and beachfront roofs in particular can show streaking sooner than the two-to-three-year window that suits a typical Florida roof. Pressure on tile stays comfortably under the roughly 1,200 psi ceiling tile care guides recommend, with a concrete-safe cleaner doing the real work and footing limited to the overlap seams. Flat sections get a membrane-safe cleaner instead, and we open the drains and scuppers so water has somewhere to go.

We clean roofs. Hollywood falls inside the High-Velocity Hurricane Zone shared with Miami-Dade, so roofing products here need a Miami-Dade Notice of Acceptance regardless of being in Broward County. Repairs and re-roofing belong to a licensed roofer, which matters given how much of the city's housing dates back a century.

A roof directly on the Broadwalk and one a mile or two inland rarely need washing on the same schedule, even at similar ages, simply from how much more salt and humidity the beachfront air carries.

Hollywood roofs mix Mediterranean Revival barrel tile in the historic downtown core, concrete tile and shingle on later construction, and flat or metal roofing on beachfront condos and newer buildings. Heat, humidity, and salt air along the coast grow algae and mildew faster here than on a comparable inland city. Pressure on tile stays well under the roughly 1,200 psi ceiling that tile care guides recommend, with a concrete-safe cleaner doing the work and extra caution on older, more brittle barrel tile.

Hollywood is inside the High-Velocity Hurricane Zone, which covers Miami-Dade and Broward counties both, and roofing products installed here need a Miami-Dade Notice of Acceptance even though the city is in Broward. We clean roofs. Repairs and re-roofing belong to a licensed roofer. Roofs closest to the Broadwalk typically need washing sooner than roofs on quieter, more inland streets farther from the beach.

What grows on a roof, and how we clean each type

The right method depends on the roof material. We match the cleaner and the footing to it.

Roof types, what grows on them, and how we clean them
Roof typeWhat grows or builds upHow we clean it
Asphalt shingleDark algae streaks, moss, and lichenRoof-safe cleaner, low-pressure rinse, never a pressure blaster
Concrete or clay tileDark algae, mildew, and moss in the valleysSoft wash, careful footing, and a rinse that follows the tile pattern
Flat or low-slope roofMildew, dirt film, and standing-water stainsLow-pressure wash with a membrane-safe cleaner, drains cleared
MetalDirt film, mildew, and oxidationGentle wash and rinse that will not scar the coating

On asphalt shingles the dark streaks are usually a cyanobacterium called Gloeocapsa magma, which feeds on the limestone filler in the shingle and spreads on the wind, as the Asphalt Roofing Manufacturers Association explains. Warm, humid, shaded roofs grow it fastest.

Soft wash or pressure washing?

This is the question that decides whether a roof cleaning helps your roof or hurts it.

High-pressure blasting compared with low-pressure soft wash on a roof
On your roofHigh-pressure blastingOur low-pressure soft wash
ShinglesKnocks off protective granules.Granules stay in place.
Algae and mildewRoots stay and streaks return sooner.Cleaner kills growth at its base.
Water intrusionCan force water under the roof surface.Gentle flow that follows the way rain runs.
Tile, flat, and metalCan chip tile and scar coatings and membranes.Safe on tile, flat roofs, metal, and shingle.

We use a soft wash on every roof. The cleaner does the work, and the water only carries it off. That is slower than blasting, and it is the reason your roof comes out of it in one piece.

How we wash a roof

Gutters first, roof second, gutters again at the end.

  1. 1

    We inspect and plan

    We check the material, the pitch, the condition of the surface, and the safest way up. Loose or damaged areas get flagged before we start.

  2. 2

    We clear the gutters

    Debris comes out first so the rinse has a clear path and the roof does not wash dirt into a full trough.

  3. 3

    We protect the plants

    Shrubs and flower beds under the roof line are wet down and covered.

  4. 4

    We apply the roof-safe cleaner

    The cleaner goes on at low pressure and sits long enough to kill the growth at its base.

  5. 5

    We rinse gently

    A low-pressure rinse carries the cleaner and the dead growth down and off, the way rain would.

  6. 6

    We flush the gutters again

    Runoff from the roof leaves through the gutters and downspouts, so we flush them a second time.

  7. 7

    We photograph the result

    You get before and after photos and a note on anything we saw that needs a roofer.

A roof mid-wash with a clean line against dark streaks at a Hollywood home

Streaks fade as the cleaner works. The rinse only carries them off.

Before and after: a roof soft washed

The same roof, photographed from the same spot before and after.

Before roof washing in Hollywood: a roof with dark algae streaks
Before: streaked roof
After roof washing in Hollywood: the same roof, clean
After: the same roof, clean

Safety, and what we leave to roofers

Roofs are dangerous places. We use the right ladder angle (see NIOSH guidance), we walk only on surfaces that can take it, and we never use high pressure. If a roof is too steep, too fragile, or too damaged to wash safely, we say so.

We clean roofs. We do not repair or replace them. When we find damaged roofing, we photograph it and tell you plainly, so a licensed roofer can take it from there.

ZIP codes where we wash roofs in Hollywood

Pick your ZIP code to see the neighborhoods we cover, or call and we will confirm your street.

View all 5 ZIP codes

Not sure we cover your ZIP code? Call us at (813) 856-2726.

Roof pressure washing questions, answered

How much does gutter cleaning cost in Hollywood?

It depends on the feet of gutter, the number of stories, and whether the home is beachfront, canal-front, or farther inland. Call with your address and we'll have a price ready for you.

How much does roof cleaning cost in Hollywood?

It depends on the roof size, material, and salt exposure. A beachfront condo and an inland bungalow are different jobs. Share your address and we'll price it by phone.

When is the best time to clean gutters and wash the roof in Hollywood?

The visit that counts most is early May, just ahead of the wet season. Plan another between October and December once hurricane season has wound down.

Does living near the Broadwalk affect roof or gutter maintenance?

Yes. Salt air along the beach speeds up oxidation and algae growth compared to a drier, more inland property.

Which Hollywood neighborhoods do you serve?

We cover the city end to end, from the Broadwalk and beachfront to the historic downtown core and the canal-front neighborhoods inland.

Did Hurricane Irma cause lasting damage to Hollywood roofs?

The 2017 storm caused real damage across the city. If your roof hasn't been checked since, a cleaning is a good time to spot anything that needs a closer look from a roofer.

Do homes near West Lake Park need different service than the Broadwalk?

Generally, yes. West Lake Park's inland properties deal more with mature tree canopy, while Broadwalk homes deal more with direct salt exposure.

Do you work on homes near the Seminole Hard Rock area?

Yes, along with the rest of Hollywood. Share your street and the closest cross street when you call us.

Does salt air make Hollywood roofs need more frequent washing?

Often, yes, especially on beachfront and canal-front properties, where algae and salt buildup can show up sooner than the usual two-to-three-year window.

Can you safely wash a historic Hollywood barrel tile roof?

Yes, with a soft wash well under the pressure ceiling tile care guides set, and extra-careful footing on older barrel tile, which can be more brittle than newer concrete tile.

Does Hollywood's hurricane history affect how often roofs need washing?

Not directly, but a roof that hasn't been checked since Hurricane Irma in 2017 is worth a closer look, since storm damage and years of algae growth can compound.

Is barrel tile more fragile than concrete tile in Hollywood?

Generally, yes, especially on century-old historic downtown homes. We use lighter pressure and more careful footing on original barrel tile than we would on newer concrete product.

Dark streaks on your roof?

Call and tell us the roof material and what you see. We quote by phone and find a day that works.

Call (813) 856-2726
Call (813) 856-2726